Stainless Steel Ball Valve Manufacturer

Contact Anix Valve USA today for a quote on our stainless steel valves! Visit

ANIX is known for its stainless steel ball valve, which is conjointly better-known by different names, like knife valve or, chrome steel valve. This valve has fully grown to be a crucial bit of fluid management instrumentality for extended than one hundred fifty years. In fact, I assumed this was the primary valve patent issued at intervals. The gate valve has fully grown to be a one-stop answer for fluid management decision with comparatively very little basic style modification Gate valves are seen as a the seal between cowl and the seat.


The gate valve is not ideal for flow management, but they're designed for absolutely open or fully closed positions. once the valve is absolutely open, there's no obstruction within the flow path, resulting in very little friction loss. Slippery valves are often purchased with rising arm and non-rising arm sorts. you'll learn relating to the position from the valve by exploring the rising arms. In places with underground, and height limits, non-rising valves are used.

Picture of SS316 2 Piece Full Port Ball Valve 1000/2000 WOG Lockable Threaded

Gate valves use a flat gate closure that slides out and in or down and up between 2 parallel plates to opened up or shut the valve. Gate valves aren't used for flow regulation, instead for put off regulation. Gate valves are vulnerable to corrosion, that can, in time, cause leaks or stoppage. The gate can corrode and fall into the road, creating a blockage.


ANIX ball valves use a spherical closure part employing a hole within it. Once the outlet is aligned with the flow, the valve is opened. The valve closes within the event the solid facet from the ball is turned towards the flow. Packing and washers are used to forestall the valve from unseaworthy material. The valve prevents corrosion as a result of the chrome outer layer. ANIX ball valves simply go longer. ANIX gate valves are created with forged iron so need special care throughout overhauling. The valves or maybe the gates are circular or wedge-formed discs and also are connected to a rib spindle operating within a nut.


Stainless steel is one in all the strongest and most resilient materials out there, with top-notch pressure and temperature resistances. There are too several applications for stainless steel ball valves, however, during this article we are going to consider a number of the foremost common. But first, what makes ANIX stainless steel this special?


What is ANIX stainless steel?

The reason there is such a large amount of uses for stainless steel ball valves is that it's an amazing material. It's more durable than forged iron, ductile iron, brass, and copper once it involves pressure rating and temperature tolerance. Stainless steel competes with steel on several fronts, however, beats it by a mile in corrosion resistance. For this reason, applications for stainless steel ball valves are usually demanding in one or a lot of space (corrosion, temperature, pressure).

Picture of CF8M Flanged 2 Piece Full Port Ball Valve ANSI 150 / ANSI 300 (Fire Safe)

Stainless steel may be a fantastic material that's tough to beat, however, it will have one major drawback: worth. There's a serious worth jump from iron valves to steel valves, however, it's warranted! The worth jump is mirrored by a jump in quality from one material to a different. ANIX stainless steel has high tolerance, temperature limits, and corrosion resistance.


Not all stainless steel is formed equally! There are many grades of stainless steel, the foremost common being 304 and 316. These numbers represent the chemical makeup of the fabric, which consists of a minimum of 50% iron and 10% Cr despite grade. Typically, a lot of Cr within the combine, the upper the corrosion resistance. 304 chrome (stainless) steel resists corrosion fairly well because of the addition of nickel within the combine. 316 chrome (stainless) steel is healthier equipped for harsh environments, though. it's higher levels of nickel and a substance known as metal additional to the combo. Each nickel and metal work with the Cr to form the alloy a lot of proof against chlorides, that are found in marine environments. Ball valves product of 316 chrome (stainless) steel is a number of the foremost corrosion-resistant you'll be able to notice.


ANIX sells a large variety of valves, however, what are stainless-steel ball valves used for, specifically?  Below are some jobs wherever stainless-steel shows its price.


Petroleum purification

Crude oil will contain water, greenhouse emission, sulfur, and every one type of microorganism. These will create an awfully corrosive substance. It'll slowly break down metal over time, thus you want to get valves and pipes that may be ready to stand up to it for the longest quantity of your time. Stainless-steel ball valves can impediment longer than alternative materials so that they are the apparent alternative.


Seawater Environments

Some applications happen in or close to water, like chemical action. Marine environments are corrosive, wet, dangerous, and, harmful to all or any varieties of materials; however, as a result of they involve in water, They have an effect on metals most of all. In these varieties of applications, several prefer to use plastic ball valves that will have a higher resistance to water and harsh chemicals than most metals. The matters with this can be that plastic valves lack the flexibility to perform below high pressures and extreme temperatures. stainless-steel ball valves handle intense conditions with ease. And with the correct maintenance, the untainted valve will have an extended lifetime around water.


Brewing Systems

Finally, we are going to take a fast check out production. Stainless-steel ball valves are employed in around each distillery. Most ordinarily placed on the kettle, untainted ball valves enable the user to manage liquid flow throughout transfers. The rationale stainless-steel is critical it comes in direct contact with wort, The liquid extracted throughout the mashing method once production of brewage or hard liquor. This can be a corrosive liquid substance that might touch upon valves made from iron. Since plastic valves can't handle the temperatures encountered in production, stainless-steel is that the best option! ANIX always prepares the best quality valves & stainless steel ball valves!



Stainless Steel Valves and Fittings Manufacturer

Anix, a leader in fittings and valves industry recently unveiled its range of products to the world to suffice the increasing needs of consumers. Now, with the integration of these modern high-class valves and fittings, end users are capable of transforming opportunities and restrictions into tangible benefits for practical applications.

“Anix has been in business since 1988, and we strive to make it the obvious choice for those who seek leading valve manufacturers all around the world. With new technological advancements, the company is looking forward to providing its customers with convenient and valuable solutions,” said Brite Lee, the Co-founder of Anix Valve USA.

“Our exceptional customer service consistently beat our competitors and is one of the key factors which drive our clients back to us at all times, providing them with new and pragmatic solutions,” he added.

They are equally expanding their range of products with the integration of custom manufacturing service. This step is meant to attract contractors and suppliers to come in and explore the range of stainless steel valves, cast steel valves, and other fitting equipment. Quality Management is the most important thing that has been taken care of by the company. Anix holds a range of certifications to ensure that the end users get access to high-class valves and fitting instruments.

With the breadth of innovation, the company is going to be your future stocking partner, which is the company’s significant step towards a positive and welcoming future.

About Anix Valve USA:

Anix Valve USA is a leading manufacturer of the range of valves and fittings made of stainless steel, cast steel, titanium, etc. They’ve been serving over hundreds of importers, distributors, and OEM customers all over the globe since 1988.

For more information about Anix Valve USA, please visit

You’re the only one missing.